100Ah Phosphoric Acid Philippines Sugar daddy app heat loss control characteristics and production behavior of iron and steel package batteries

Abstract This research uses 100 Ah phosphate iron-sized battery as the research object. The heat-discharge characteristics and gas change rules of batteries under 40%, 60%, 80%, and 100% SOC were characterized by industrial computer shutdown scanning (CT), scanning electronic microscopy technology (SEM), and gas chromatography spectrometer (GC). The system analyzes the heat-discharge characteristics and gas changes of batteries under 40%, 60%, 80%, and 100% SOC. As a result, over-heating contact of the battery heat-discharge can be divided into four stages: over-heating temperature decrease, side reaction expansion, separation contraction and cracking and smoke, and thermal control causes dramatic temperature rise and production. After further calculation of the heat energy, the peak heat rates of 100%, 80%, 60%, and 40% SOC batteries were found to reach 140.34, 115.44, 14.76 and 3 respectively..9 male actors of similar age. The other three are middle-aged men. The energy released at 1 kW and 100% SOC is comparable to the energy of 104.63 g trinitrotoluene (TNT), which destroys the semi-volume to 5.90 m, which is 64.3% more dangerous than 40% SOC. Characterization of battery data after heat loss control revealed that the orthogonal phosphate iron-steel data transformed from square state to unregulated spheres of group, and the negative graphite structure transformed from layer state to spherical particles of group, which was due to the drama of internal sub-reaction. By comparing the product characteristics, it is found that the increase in SOC leads to an increase in H2 volume of battery production and a drop in CO2 volume. The explosion risk of battery production under each SOC is higher than that of popular gases, and the lower limit of explosion shows a trend of falling first and then rising. The results of this study provide theoretical basis and practical guidance for the Sugar daddy design of the subsequent energy storage system.

Keywords Large capacity; heat dissipation; phosphate steel encapsulation batteries; sanitary characteristics; production

With the global carbon neutrality and carbonization peak, the new dynamic field is ushering in a grand development opportunity. Steel ion batteries have become the focus energy storage technology in consumer electronics, energy storage stations, new power vehicles, aerospace and other fields, with their unique advantages such as small body size, high power, large energy density, and long circulation life. However, under extreme operating conditions, such as overload charge and discharge, extreme temperature environment or internal short circuit, the steel ion battery will face thermal runaway (TR) risks, which not only affects the battery function, but also causes fire and explosions. Therefore, the in-depth study of the heat-displacement control characteristics of steel ion batteries has the main meaning for the safety of the battery and the healthy development of new dynamic industries.

In recent years, research on the heat-displacement control characteristics of steel ion batteries has been developed from multiple dimensions such as development methods, testing conditions, battery data, etc. Zhu et al. compared the overheating behavior of the 25 Ah LFP software package and the case battery, and found that the impact of the packaging situation on the heat loss control is important. In the power function of the packaging data, the pressure relief valve of the case battery can effectively delay the heat loss control. Wang et al. discussed the hot control characteristics of the most disagreeable data (LFP, NCM111, NCM622, NCM811), and found that the hot control of LFP batteries #marriage first and fall in love, the warm and cool little sweet article started early, and the hot control was gentler. The thermal stability of the NCM battery increased and decreased, and the heat control persecution increased. Wei applied the puncture, side heating and overcharged contact NCM523 steel ion battery heat removal control, and after charging and testing, it was found that after charging and testingBattery damage is the most serious. Wang et al. compared the overcharge and control behavior of 27 Ah commercial case LFP batteries at 2C, 1.5C, 1C, 0.5C, and found that the increase in charging speed will accelerate the growth of diazepam dendrites and promote heat control. The above research on the heat loss control characteristics of steel ion batteries focused on low-capacity (<50 Ah) batteries. In order to further study the heat loss risks of large-capacity batteries, Kang et al. studied the charging behavior and heat loss characteristics of LFP shell batteries of 86, 100, 120 and 140 Ah, and found that low-capacity batteries are more prone to heat loss, while high-capacity batteries have a higher intensity of heat loss. However, the current research on large-capacity batteries is based on shell batteries, and the heat loss characteristics of large-capacity soft-packet batteries are not fully understood. In addition, current research mostly focuses on directly measuring the temperature and voltage characteristics of battery heat loss, while there is relatively little investigation into the internal morphological changes of the battery after heat loss.

In addition, when the galvanized ion battery is heated and controlled, it will produce a large number of combustible and toxic gases, which are prone to explosion and change. WSugar daddyang et al. have concluded that the important components of the heat-discharge gas control are CO2, H2, CO, and the remaining small gases are small molecular gases (CH4, C2H4, C2H6, etc.). In order to more deeply understand the combustible gas produced by the battery, Qi et al. discussed the production characteristics of NCM523 batteries under state of charge (SOC) and found that when SOC rises, the CO2 content decreases and the H2 and CO content increases. Xu et al. compared the production characteristics of battery heat loss control under the divergent touching method, and found that the most H2 is produced when the side is heated, and the starting time of the oven is heated. Shen et al. studied the gas composition and gas volume of LFP and divergent NCM proportional batteries, and found that the gas volume of NCM series batteries is 2 to 3 L/Ah, while LFP is only 0.569 L/Ah. The H2 in the gas produced by LFP batteries is higher than that in Sugar baby, resulting in its explosion upper limit being lower than that of NCM batteries. Therefore, a large number of research and discussions have been conducted under different data systems, contact methods and other conditions. However, the current research and discussions do not consider the changing rules of LFP batteries under divergent SOCs and the explosion limit.

In view of the above-mentioned discussion and the limitations of the existing discussion, this discussion aims to fill in the heat characteristics and destruction of large-capacity soft-packed phosphate steel batteries under different SOC conditions<a href="https://philipThe vacancies in the characteristics of Escort manila, and deeply explore the changes in its production characteristics and explosion limits. Through thermal experiments, the system analysis of the overheating mechanism, production energy, perishing characteristics, production gas group, explosion limit and other key parameters of 100 Ah phosphate iron steel package batteries under divergent SOC (40%, 60%, 80%, 100%) is carried out, which is the EscortSafe design and emergency response strategies are provided to scientific research, and further promote the safe development of new dynamic industries.

1 Experimental system and method

1 Experimental system and method

1.1 Experimental Research Object